Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 140

10
Regulatory Information and Specifications
Section 7 – Handling And Storage
Store in a clean, cool, ventilated area away from sources of ignition and oxidizing agents. Handle and store in a
manner suitable for an OSHA class IB Flammable Liquid. Electrical services must meet applicable codes. Use
non-sparking tools.
Section 8 – Exposure Control – Personal Protection
Provide ventilation to maintain TLV. Use non-sparking tools. Avoid inhalation of vapors, contact with eyes and
repeated or prolonged contact with skin. Do not take internally.
Section 9 – Physical And Chemical Properties
BOILING POINT (degrees F (degrees C)):180 (80)
% VOLATILE BY VOLUME @ 25 degrees C:100
VAPOR PRESSURE (mmHg @ 25 degrees C): 33
EVAPORATION RATE (BUTYL ACETATE-1)>1
VAPOR DENSITY (AIR = 1): <1
FORM:liquid
% SOLUBLE IN WATER @ 25 degrees C:100
ODOR:alcohol
SPECIFIC GRAVITY (G/CC@25 degrees C):0.79
APPEARANCE OF LIQUID:clear
Section 10 – Stability And Reactivity
STABILITY:Stable
HAZARDOUS POLYMERIZATION: Will not occur
INCOMPATIBILITIES / CONDITIONS TO AVOID: Caustics, amines, alkanolamines, aldehydes, ammonia, strong
oxidizing agents and chlorinated compounds.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide
Section 11 – Toxicological Information
Not Available
Section 12 – Ecological Information
Not Available
Section 13 – Disposal Considerations
Follow Federal, State and Local Regulations.
130 Phaser 840 Color Printer