Tektronix PHASER 840 Advanced Features And Troubleshooting Manual page 120

8
Connecting Scanners and Hard Drives
110 Phaser 840 Color Printer
7.
Reconnect any cables that were disconnected, and turn on the printer.
8.
From the printer's front panel, print a Startup Page and check it to make
sure that the hard disk drive is present.
Page Count:
Serial Number:
Adode® PostScript®:
Firmware:
Feature set:
Installed RAM:
ROM Fonts Available:
IDE Disk:
SCSI Disk:
Print Quality:
TekColor® Correction:
Parallel Port:
Ethernet®:
9.
At your computer, reconfigure the printer driver. For more information,
refer to page 111.
504
Ip3-63
Startup
Printer Name:
OS 1.14 / PS 8.23 / Eng 8
Page Count:
Serial Number:
Full
Adode® PostScript®:
Firmware:
Feature set:
Installed RAM:
128 MBytes ROM Fonts Available:
IDE Disk:
SCSI Disk:
164 Fonts Print Quality:
TekColor® Correction:
Parallel Port:
2067 MB total, 2
Ethernet®:
Not Connected
EtherTalk®:
Enhanced
NetWare®:
Automatic
TCP/IP:
Language:Postscript®
Protocol:Binary
Handshake: Bi-directional
PhaserShare® Series B B Adobe Systems Incorporated which may be
ANTONE® and P ANTONE CALIBRA TED are trademarks of Pantone, Inc.
10BASE T 08:00:11:08:59
840-3-09
840-3-08
Phaser 840 Color Printer
®
Phaser Swift
504
Ip3-63
OS 1.14 / PS 8.23 / Eng 8.51 / Net 5.55
Full
128 MBytes
164 Fonts
2067 MB total, 2001 MB free
Not Connected
Enhanced
Automatic
Language:Postscript®
Protocol:Binary
Handshake: Bi-directional
PhaserShare® Series B Built-In Ethernet® Interface
10BASE-T, 08:00:11:08:59:53
LaserWriter@WV 60/61, Node ID: 5000.200
Operating Mode: Print Server (TEK085953)
Connection Mode:NDS (No Preferred DS Tree)
Networks: 0(802.2), 98 (802.3), 0 (Ethernet ll), 0 (SNAP)
Status Message: Can't find NDS tree, will retry in 60 sec
Address: 134:62:91:178
Network Mask: 255.255.255.0
Gateway: 134:62:91:1
Broadcast: 134:62.91.255
IPAddress Source: Front Panel
840-3-10