Inserting Zippers - JUKI HZL-DX series Instruction Manual

Inserting zippers

Preparation before attaching zipper
Runstitching ... Stitch length "Automatic"
Crotch end
Reverse stitch (1cm)
(right)
60
Pattern No.
Presser foot
Machine basting ...
Stitch length "4"
Fabric
(wrong side)
(left)
Direct 1
Zipper presser foot
(B)
Zippers are set in two different ways: by inserting into
the side seam of the garment and by centering in posi-
tion.
* Make sure to use center needle position
(Stitch pattern No. Direct 1).
1
Use the standard presser foot (A) to sew.
Place the fabrics face-to-face. Check the runstitching
length and the length of the zipper to be inserted. Ma-
chine baste the zipper onto the fabrics.
Machine basting = zipper opening length + 1 cm
2
Attach the zipper presser foot (B) to the
machine.
When sewing the left side of the zipper, place the zip-
per under the right portion of the zipper presser foot.
When sewing the right side of the zipper, place the
zipper under the left portion of the foot.
Attention
Turn OFF the power switch
before replacing the presser
foot.