Buttonhole Stitches - JUKI HZL-DX series Instruction Manual

Buttonhole stitches

* The buttonhole length is automatically determined only by placing a button on the buttonhole press-
er foot.
* The machine can sew buttonholes for buttons with diameters of 0.7 - 3.2 cm.
* In case of stretchy fabrics, use non-elastic interlining on the wrong side of the fabric.
* Make sure to perform test sewing to see that the machine sews buttonholes correctly.
* Buttonhole Nos. 09 - 12 are for knit fabrics and should be used with a knit needle.
Buttonhole type
Buttonhole for medium to heavy
0
weight materials
Standard buttonhole
Stitch length is larger.
01
Buttonhole for heavy weight ma-
terials
02
Sews buttonhole double
Manual 2-step buttonhole
Use this buttonhole, when there
is an overlapped section in the
03
fabric or when you want to sew
larger buttonhole than 3.2 cm
diameter. (Refer to page 55)
04
Buttonholes for women's blouses
and children's clothes.
Also for light weight materials
05
Keyhole buttonhole for heavy
06
weight materials such as suits,
jackets, coats, etc.
07
Round keyhole
Large and thick keyholes for
08
heavy weight materials
Pattern
number
Direct 0
Pattern No. Buttonhole 01, 02,
04~15
Buttonhole presser
Presser foot
foot (E)
Turn OFF the power switch
before replacing the presser
foot.
* Refer to page 55 for button-
hole 03.
Buttonhole for light weight knit
09
(also used as decorative button-
hole)
Buttonhole for medium weight
10
knit (also used as decorative
buttonhole)
Buttonhole for light weight knit
11
Sews buttonhole double
Buttonhole for medium weight
12
knit
Sews double buttonhole
13
Decorative buttonholes
14
Decorative buttonhole which look
like hand-sewn
15
Attention
49