JUKI HZL-DX series Instruction Manual page 105

DX7 Only
For the pattern Nos. 68 and 69 of the Decorative 2, zigzag width gradually increases at the start
●
of sewing the patterns and gradually decreases at the end of sewing. These patterns are used for
overcasting appliqué, etc.
↑ Adjusting range is from size 1 to size 5.
(Default setting is size 3.)
Size 1
How to sew the pattern)
Example of use)
Appliqué of a leaf
Size 2 Size 3
1 Select the pattern and start the sewing machine.
The zigzag width gradually increases.
When the preset zigzag width is reached, the sewing machine continues sewing with
that zigzag width.
2 Press the lock stitch button at the end of sewing.
For the same sewing length with the start of sewing, the zigzag width gradually de-
creases. The sewing machine sews lock stitches and automatically stops.
Size 4 Size 5
The more the figure of "Size" increases, the
sharper angle of degree of stitches will be.
Select the figure of
"Size" so that the
degree of angles
of stitches at the
joining point of the
stitches at the start
and end of sewing
are aligned.
103