Adjustment
11
Position of the spreader crosswise to the direction of sewing
.04.13
11 - 14
Requirement
1. The point of spreader 1 should have a side distance of 0.1 mm to the looper.
2. The point of spreader 1 should be 0.1 mm above the back of the looper.
0,1 mm
62-034
Fig. 11 - 13
Position the looper eye next to the point of spreader 1 by turning the balance wheel.
Adjust holder 2 (screws 3) in accordance with requirement 1.
Turn the balance wheel until the point of spreader 1 is positioned above the back of the
looper.
Adjust holder 2 (screw 4) in accordance with requirement 2.
1
2
4
62-033
3