Table of Contents
Advertisement
9
Threading the machine / adjusting the thread tensions
.02
Fig. 9 - 02
Thread the needle thread as shown in Fig. 9-02.
Adjust the needle thread tension by turning milled screw 1.
Open the top and side cover of the looper compartment.
Thread the looper thread as shown in Fig. 9-02.
Insert the thread on the looper 2 with a pair of tweezers.
Adjust the looper thread tension by turning milled screw 3.
62-023
Switch off the machine!
Danger of injury if the machine is started accidentally!
Setting up
2
1
+
- - - - -
3
9 - 2
Advertisement
Table of Contents
