10
Checking the oil level / filling in oil
.02
Fig. 10 - 01
If necessary remove screw 2 and fill in oil until an air bubble is visible.
Tighten screw 2 again.
2
1
Switch off the machine.
Danger of injury if the machine is started accidentally!
Before each use, open the side cover and check the oil level. The oil level must
always be visible in inspection glass 1 (air bubble must be visible, or the oil level
is too high).
Only use oil with a mean viscosity of 22.0 mm²/s at 40ºC and a density of 0.865
g/cm³ at 15ºC.
We recommend PFAFF sewing machine oil, part number 280-1-120 144.
Care and Maintenance
10 - 2