Set Delayed Cooking; Delayed Cooking Runs Down; Child Lock; Child Lock In Manual Mode - IAG IOE6SE1 Manual

COOKING TIME is 11:15 h:min.
COOKING TIME starts as soon as the START TIME is reached. The relay is closed and the symbol
COOKING POT is displayed.
4.8.1

Set DELAYED COOKING

1. Set desired COOKING TIME acc. Chapter 4.6.1.
2. Set desiret END of COOKING TIME acc. Chapter 4.7.1
4.8.2

DELAYED COOKING runs down

The relay contact is opened and the symbol COOKING POT
COOKING TIME starts as soon as the START TIME is reached. The relay is closed and the symbol
COOKING POT is displayed.
4.8.3 Modifying / Deleting DELAYED COOKING
Modifying / Deleting of COOKING TIME see chapter 4.6.3
Modifying / Deleting of END of COOKING TIME see chapter 4.7.3.
4.8.4 DELAYED COOKING has expired
See chapter 4.6.4 (COOKING TIME has expired).
4.9

CHILD LOCK

To avoid unwanted selection, setting resp. change of functions, the unit disposes a CHILD LOCK
function.
4.9.1 Activation of CHILD LOCK
The CHILD LOCK function can be activated while TIME of DAY is displayed in MANUAL mode,
regardless whether a COOKING TIME or an END of COOKING TIME runs down in AUTOMATIC mode.
CHILD LOCK function is activated by touching SET(+) for a minimum of 5 seconds until the CHILD
LOCK symbol is displayed. From this moment on all other functions are locked.
Exception: If a function, e.g. COOKING TIME has expired, the ACOUSTIC SIGNAL can be terminated
by touching any Touchpad, although the CHILD LOCK is active.
Touching any of the Touchpads while CHILD LOCK is activated causes an ACOUSTIC SIGNAL acc.
Chapter 5.2 and the CHILD LOCK symbol flashes for two seconds.
4.9.2 Deactivation of CHILD
CHILD LOCK function is deactivated by touching Touchpad SET(+) again for a minimum of 5
seconds until the CHILD LOCK symbol
selectable again.

4.93 CHILD LOCK in MANUAL Mode

Activating the CHILD LOCK in MANUAL mode completely locks the appliance by switching off the
relay contact. The symbol Man is switched off. After deactivation according chapter 4.9.2, the
symbol Man is displayed again and the relay contact closes.
4.9.3 Power failure while CHILD LOCK is activated:
The child lock remains activated after a power failure. Before renewing the settings, the CHILD
LOCK has to be deactivated. See 4.9.2.
Operating instructions for full touch control PCB
Key operation:
Installation & Operation Manual for 600mm Multifunction ovens
switches off. From this moment on all functions are
is off until START TIME is reached.