Setting The Time; Manual Use; Automatic Use; Semi-Automatic Use With Cooking Time Setting - IAG IOE6SE1 Manual

Installation & Operation Manual for 600mm Multifunction ovens
Fig.10
Tasto +e-
+and buttons .
the +and –buttons increase or decrease the time at a speed depending on how long button is
pressed

Setting the time

press any two buttons (cooking time ,end time ,minutes counter) at the same time ,and +or –button
to set the desired time .this deletes any previously set programme.
The contacts are switched off and the AUTO symbol flashes.

Manual use

By pressing the manual button the relay contacts switch on, the AUTO symbol switches off and
saucepan symbol lights up.
Manual operation can only be enabled after the automatic programme is over or it has been
cancelled.

Automatic use

Press the cooking time or end time button to automatically form the manual to the automatic
function.

Semi-automatic use with cooking time setting

Press the cooking time button and set the desired time with +or -, the AUTO and cooking time
symbols light up continuously. The relay switches on immediately. When the cooking end time
corresponds to the time of day, the relay and the cooking time symbol switch off. the sound singal
rings and the AUTO symbol flashes.
Semi-automatic use with end time setting
Press the end time button. The time of day appears on the display. Set the cooking end time with
+button. The AUTO and cooking time symbols light up continuously. The relay contacts switch on.
When the cooking end time corresponds to the time of day , the relay and the cooking time symbol
switch off. When the cooking time is up. The AUTO symbol flashes, the sound singal rings and both
the relay and the cooking time button switch off.
Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the cooking time with +or –button. The AUTO
and cooking time symbols light up continuously. The relay switches on. By pressing the cooking end
time button the next cooking end time appears on the display. Set the cooking end time with
+button. The relay and the cooking time symbol switch off .the symbol lights up again when the
time of day corresponds to the cooking start time. When the cooking time is up, the AUTO symbol
flashes, the sound signal rings, the cooking time symbol and the relay switch off