INDEX pag. pag. GENERAL WARNINGS Read carefully all the instructions contained in this booklet. It provides you with important information regarding the safe installation, use and maintenance of the appliance as well as useful advice for getting the best out of your oven. Keep this booklet in a safe place for future reference.
IMPORTANT Keep from sitting and put heavy objects on the oven door when it is open. Make sure that the oven is on the closed mode (off) when the appliance is not in use. WARNING - WARNING WARNING The manufacturer reserves the right to make modifications that may be necessary and useful, without prejudicing essential safety and working features.
INSTALLATION How to remove packing The elements used for packing (cardboard, bags, polystyrene, cards) must be kept away from children because they are a potential source of danger. Installation, regulation, transformation, maintenance should only be done by qualified personnel only. INSTALLING THE APPLIANCE FITTING THE APPLIANCE IMPORTANT...
ELECTRICAL CONNECTION The appliance must be installed by a suitably qualified person in accordance with these instructions and with the requirements of the Australian Wiring Rules AS/NZS 3000. Fixed wired installations are to be provided with suitable isolation means in accordance with the said rules. Any plug socket installed for the purpose of connecting the appliance to supply must be readily accessible when the appliance is installed.
HOW TO COOK N.B. Set any timer, clock or programmer to manual mode. N.B. Before carryng out cleaning, disconnect the appliance from electrical supply. General information and use precautions - This oven is always used with CLOSED DOOR for all the cooking functions (Grill included). PANEL CONTROL Selector Display...
COOKING FUNCTIONS NOTE: Warning : the oven must be used with the door closed. Temp. °C Cooking min 40 To change the oven temperature, turn the selector to the symbol indicators max 260 increase, or to to lower the temperature. Oven light Defrosting with fan Medium grill...
Page 8
Fan-assisted natural convection 50 ÷ 260 Fan assisted total grill 50 ÷ 200 Lower heating element 50 ÷ 260...
INSTRUCTIONS FOR USE OF CONTROL DEVICES (display LCD) Minute minder Clock Start of cooking Cooking time End of cooking Defrosting Turnspit Key lock SETTING THE TIME OF DAY Important Note MINUTE MINDER COOKING TIME Important zero Setting zero...
COOKING END TIME Important zero Setting zero COOKING TIME AND COOKING END TIME COOKING TIME COOKING END TIME zero CANCELLING PROGRAMMES SETTING THE KEY LOCK ADJUSTING THE DISPLAY BRIGHTNESS or ...
Page 11
PANEL CONTROL (touch control model ) Fig. 5 Turning the oven on and off Controls lock. lock The following cooking functions can be set by using the programmer (Fig. 5): Note: the functions selected and the oven temperature will appear on the display (see fig. 5). Warning : the oven must be used with the door closed.
Page 12
Pr 03 Large grill (turnspit according to the model 50 ÷ 200 Medium Fan-assisted Grill Pr 04 50 ÷ 260 Fan assisted total grill Pr 05 50 ÷ 200 Natural convection Pr 06 50 ÷ 260 Fan oven Pr 07 50 ÷...
INSTRUCTIONS FOR USE OF CONTROL DEVICES (touch control model) Display programmer SETTING THE CLOCK Note: TIMER COOKING TIME STOP COOKING...
Page 14
COOKING TIME AND STOP COOKING TIME STOP COOKING Oven cooking chart Function Level °C Minutes Meats Poultry Scones Bread Pastres Cakes...
Page 15
DESCRIPTIONS OF ACCESSORIES Oven accessories front part B = Drip dray (optional) A = wire shelves C = Grill pan set NOTE: oven shelves Warning: the positions for shelves are Bump To remove the shelves from the oven, fig. 5 To replace, Install shelves by locating them in the horizontal guide rails on the oven walls.
CLEANING AND MAINTENANCE NOTE: Removal of oven door "A" "A" "B" "C" "D" "A" CAUTION: Fig. 8 Do not use rough or abrasive materials or sharp metal scrapers to clean the glass doors of the oven since they may scratch the surface and cause the glass to break.
Page 17
Side opening door. N.B.: Warning: this operation must be carried out by skilled staff during assembly.