Table of Contents
Advertisement
Touching Touchpad SELECT momentarily, the next following function is chosen.
Touching Touchpad SELECT permanently causes no automatic change. Touching Touching
Touchpad SELECT for more than 10 seconds an ACOUSTIC SIGNAL according chapter 5.2 occurs
and the SELECT mode terminates automatically.
3.4 Touchpads SET(+) and SET(-)
Within 5 seconds after selection of a function, the time or the signal volume can be set with
Touchpad SET(+) or SET (-).
4.0 Functions
4.1 Start of a function
5 seconds after setting, a set time or volume is accepted and the chosen function starts
automatically. The display shows the current TIME of DAY, except the MINUTE MINDER is active. In
this case the display shows the remaining time of the MINUTE MINDER.
4.2 Power ON / intlal operation
Safety advice:
Line voltage 230V at the conductive keys! Do not touch without insulation.
Use correct insulation, that the user can not touch the conductive keys directly.
After connecting the unit to the mains, the display shows the default TIME of DAY 12:00 h:min
flashing. In order to avoid the heaters to automatically switch on after a power failure, the relay
contact opens as soon as power returns. Touching any pad the relay contact closes and the
display shows the default time 12:00 h:min permanently.
The colon and the symbol
described in chapter 4.3.2
4.3 TIME of DAY
4.3.1 Select TIME of DAY mode
Step through the sequences of function with Touchpad SELECT as described in chapter 3.3 until the
symbol
flashes.
4.3.2 Set TIME of DAY
Installation & Operation Manual for 600mm Multifunction ovens
SELECT
END of COOKING
TIME
setting
Current TIME of DAY
setting
SELECT
Setting value of
ACOUSTIC SIGNAL
continue to flash. It is possible now to set the current TIME of DAY as
SELECT
Hide quick links:
Advertisement
Table of Contents
