Sound Signal; Start Programme And Check; Setting Error; Operating Instructions For Electronic Timer (3 Keys) - IAG IOE6SE1 Manual

Minutes counter
Press the minutes counter button and set the cooking time with +or –button.
The bell symbol lights up when the minutes counter is operating, when the set time is up, the sound
rings and the bell symbol switches off.

Sound signal

The sound signal starts at the end of a programme or of the minutes counter function and it lasts for
15minutes.
To stop it, push any one of the functions buttons.

Start programme and check

The programme starts 4seconds after it has been set. The programme can be checked at any time
by pressing the corresponding button.

Setting error

A setting error is made if the time of day on the clock falls within the cooking start and end times. To
correct the setting error, change the cooking time or cooking end time the relays switch off when a
setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press the –button until 00 00 appears on
the display. A set programme will automatically cancel on completion.

Operating instructions for Electronic Timer (3 keys)

1. Functional description-Overview
The operation of this timer is done 3 buttons. The functions of the buttons are:
With this arrangement it is possible to select the following four functions:
● Minute minder
● Operation period
● Operation stop
● Time-of-day
These modes can be selected by repeatedly pressing the mode button. The desired time for minute
minder, operation period, operation stop or time-of-day can be set with the "+"and "-"buttons.
As an option, the duration of a pyrolysis can be controlled, if an oven features such function.
2. Programming
2.1 Draft of the display
The LED display is separated in the following way:
Installation & Operation Manual for 600mm Multifunction ovens