Connecting The Handset, Telephone Line Cord And Power Cord - Muratec M860 Operating Instructions Manual

Connecting the Handset, Telephone Line Cord and Power Cord

Power cord
Plug the non-pronged end of the power cord into the
back of the fax machine, as shown. Plug the pronged
end of the power cord's plug into a 230 V
outlet (preferably on a surge suppresser, as mentioned
on page 1.10).
Telephone line cord
Plug one end of the uncurled telephone line cord into the LINE
connector on the back of the fax machine. Plug the other end into
a standard telephone wall jack or into a telephone line surge
protector.
* Note: The telephone line cord and the power cord type may differ due to local regulations.
electrical
AC
Handset
Plug one end of the fax handset's curl cord
into the HANDSET connection on the left
side of your fax machine. Place the
telephone handset on the cradle.
Second telephone
If you will be using a second telephone or answering machine with
your fax machine, plug the jack from that other device's telephone
line cord into the EXT.TEL connector. (See "Attaching A Second
Telephone or Answering Machine", page 1.13, for more information.)
Getting Started
1.11