Volkswagen Jetta Hybrid 2013 Workshop Manual page 46

Jetta Hybrid 2013 ➤
7-speed dual clutch gearbox 0CG - Edition 08.2012
– Place gauge block -T10466- on small engagement bearing.
Flat side faces upwards.
– To ensure that gauge block -T10466- sits properly on engage‐
ment bearing, press down and turn gauge block.
• Engagement bearing will turn with gauge block -T10466- .
– Place digital 300 mm depth gauge -VAS 6594- on top of ruler
and position depth gauge rod on outer input shaft.
• Ruler -T40100- is lying upwards across end of shaft on gear‐
box flange.
Caution
Risk of false measurements.
♦ The ruler -T40100- should remain in this position for the
following measurements. Do not turn over, do not remove.
– Set depth gauge to "0".
– Position depth gauge rod on gauge block -T10466- , as show
in diagram.
– In this position, determine dimension "A 2 a " to gauge block -
T10466- .
• Example: Dimension "A 2 a " = 4.79 mm
42
Rep. gr.30 - Clutch