Install Front, Trim And Barrier Screen; Install Handset Wall Holder - Valor LEGEND G3 739JN Installation & Owner's Manual

Install Front, Trim and Barrier Screen

Install the front and trim chosen by the customer for
their fi replace. Install as well the barrier screen which is
provided with the front.
Show the customer remove the front and also how to
access the controls when the front is installed.
Follow the instructions provided with the front et trim and
leave those instructions behind for the customer's further
reference.

Install Handset Wall Holder

The remote control kit for this fi replace
comes complete with a wall-mounted holder.
This holder is not required in all installations
but is provided as an optional feature for
those customers who wish to mount the
remote handset to the wall.
To install the holder to the wall, fi nd a
convenient location and use the hardware
provided with the kit. See the diagram below
for required hardware and confi gurations.
Note that the holder can be installed at the
base of a light switch plate.
IMPORTANT. The location of the remote
control handset is important to assure proper
temperature regulation. To obtain a constant temperature, we recommend that the handset should be between 3
and 15 feet away from the appliance but not directly above it. We also advise that the handset should be located
away from any other heat source and not in direct sunlight as this may affect the temperature sensor located in the
remote handset.
Installation
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
QUALIFIED
INSTALLER
Alternative 2 Alternative 3
Switch Plate
37