Lighting Instructions - Valor LEGEND G3 739JN Installation & Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

OWNER'S

INFORMATION

WARNING

: If you do not follow these instructions exactly

A. This appliance has a pilot which must be lighted by hand or by remote control. Follow these instructions exactly. To

save gas, turn the pilot off when not using the appliance for a prolonged period of time.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electric switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

• If you cannot reach your gas supplier

C. Use only your hand to push in or turn the control knobs. Never use tools. If the knobs will not push in or turn by hand,

D. Do not use this appliance if any part has been under water

the appliance and to replace any part of the control system and any gas control, which has been under water.

1. STOP! Read the safety information above. Dependent on model, switch #1 may be mounted directly to valve see Fig 2A.

2. SET ON/OFF SWITCH (1) TO "OFF" POSITION.

•

"B" in the safety information above on this label. If you don't smell gas, go to the next step.

3. AUTOMA

•

ON/OFF switch (1) in ON position, MAN-knob (2) in ON position; set Flame Adjustment knob (3) to lowest setting

( );

•

On the remote control handset, press and hold the 'off ' button and

•

Further short acoustic signals indicate the ignition process is in progress;

•

When the pilot is lit, the Flame Adjustment knob (3) will automatically rotate to the highest setting.

•

Press the

4. MANUAL

•

ON/OFF switch (1) in ON position, MAN-knob (2) in MAN position;

•

Set Flame Adjustment knob (3) to the lowest setting ( );

•

Push down the metallic core (4) with a pen or similar instrument; this will establish the pil

Continue holding down metal core (4) for about 10 seconds; after release, pilot should remain lit;

•

If the pilot will not stay lit after several tries, turn the gas control knob (3) to "OFF" ( ) and call your local

service technician or gas supplier.

Reinstall the window and set the MAN-knob (2) to "ON"; turn Flame Adjustment knob (3) up ( ) or down

manually or use the up/down 'flame' buttons on the remote control handset to adjust the

1. AUTOMATIC SHUT

•

Press and hold the

•

2. MANUAL SHUT-OFF (using only the ON/OFF switch (1))

•

Press "O" the ON/OFF switch (1) to shut-off the appliance.