Table of Contents
Advertisement
Tools > Service Status
This screen displays the status of each service that is available at run time. The first column lists the services
available at run time; the second column identifies the configuration (enabled/disabled); the third column reports the
current status of each service.
Tools > Firmware Upgrade
Firmware Upgrade
Browse File for Upgrade:
file. When found, highlight the file name and press Enter so that the file name displays in the text box. Then
click the Upgrade button.
Important Notes:
•
Firmware Upgrade is available only when Firmware Upgrade Configuration is enabled on the IP
Setup screen.
•
The new firmware is written into the flash.
•
A Firmware Upgrade will take at least 150 seconds while the firmware is downloaded. Do not cycle
power during this time.
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)
Click the Browse button to open the file that allows you to locate the upgrade
Chapter 3 – Using the Web Management Software
47
Advertisement
Table of Contents
Need help?
Do you have a question about the Multimodem RJ-45 and is the answer not in the manual?
Questions and answers