Networks & Services > Service Configuration - Multitech Multimodem RJ-45 User Manual

Networks & Services > Service Configuration
On this screen you can specify the standard set of well known services available on the system. These services
enable the configuration of the user-defined services. The options to Delete or Edit a service after it has been defined
and added are available by using the table at the bottom of the screen.
Service Configuration
Enter the Name, Protocol, Source Port/Client, and Destination Port/Server for the new Service.
•
A Service Name cannot be edited.
•
A Service cannot be deleted if it is used in another configuration.
•
Service changes are reflected in all the configurations in the Web Management software where they are
used.
•
Services added here will be displayed in the following sections: DNAT, Packet Filters.
Name:
Protocol:
Source Port:
Destination Port:
Add Button:
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)
Enter the name of the Service. It has to be unique.
Enter the type of protocol (ITCP, UDP).
Enter the Source Port for this service.
Enter the name of the Destination Port for the service.
Click the Add button. The new service is added and will display on the screen.
Chapter 3 – Using the Web Management Software
38