Tools > Service Status; Tools > Firmware Upgrade - Multitech Wireless EDGE User Manual

Tools > Service Status
This screen displays the status of each service that is available at run time. The first column lists the services
available at run time; the second column identifies the configuration (enabled/disabled); the third column reports the
current status of each service.
Tools > Firmware Upgrade
Firmware Upgrade
Browse File for Upgrade:
the file name and press Enter so that the file name displays in the text box. Make sure you select the correct
BIN file; otherwise, your MTCBA-x-EN can become inoperable. Then click the Upgrade button.
When upgrade is completed, the program will return to the main login screen.
Important Notes:
•
Firmware Upgrade is available only when Firmware Upgrade Configuration is enabled on the IP
Setup screen.
•
The new firmware is written into the flash.
•
A Firmware Upgrade will take at least 3 minutes while the firmware is downloaded. Do not cycle power
during this time.
•
DO NOT perform firmware upgrade remotely via the Cellular wireless connection.
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375E)
Click the Browse button and select the firmware bin file. When found, highlight
Chapter 3 – Using the Web Management Software
45