Installation Requirements; Tools And Parts - Haier HDBC100AFS Installation Instructions Manual

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the required tools and parts before starting installation.
ALL INSTALLATIONS
Tools Needed:
•
Phillips screwdriver
•
Flat-blade screwdriver
•
Measuring tape or ruler
•
6" adjustable wrench
•
Small level
•
Flashlight
•
Shallow pan
IN ADDITION, FOR NEW INSTALLATIONS
Tools Needed:
•
Electric drill with 1/2", 3/4"and 11/2"
hole saw bits
•
Small tubing center
PARTS SUPPLIED:
a
2 - #8 x 5/8" Phillips flat head wood screws
b
2 - Phillips head, color matched toekick screws
Make sure these parts are included.
See separate parts list for accessories available for your dishwasher.
4
Parts Needed:
•
90° elbow with 3/8" N.P.T. external
threads on one end. (The other end
must fit your water supply line.)
•
Plumbers tape
•
3 UL listed wire nuts
•
One 11/2" - 2" screw type clamp
Parts Needed:
•
Copper tubing (3/8" recommended)
•
Clamp connector (strain relief) to fits
7/8" (22.2 cm) diameter hole.
•
One 11/2" - 2" screw type clamp if
connecting to waste-tee
a
b