Prepare Dishwasher - Haier HDBC100AFS Installation Instructions Manual

This connection must be before the drain trap and at least 20" (50.8 cm) above the
floor where dishwasher will be installed. It is recommended that the drain hose be
looped up and securely fastened to the underside of the counter.
*Parts available from local plumbing supply store.
Option 4, No waste disposer - no air gap:
1. Cut end of drain hose if needed (do not cut ribbed section).
2. Attach drain hose to waste tee with 11/2" to 2" (3.8 to 5 cm) screw-type clamp*.
This connection must be before the drain trap and at least 20" (50.8 cm) above the
floor where dishwasher will be installed. It is recommended that the drain hose be
looped up and securely fastened to the underside of the counter.
*Parts available from local plumbing supply store.

PREPARE DISHWASHER

Do not use dishwasher until completely installed.
Do not push down on open door.
Failure to follow these instructions can result in serious injury or cuts.
large spring-type
clamp
disposer
inlet
drain trap
drain hose –
cut here if needed
screw-type clamp
waste
tee
drain trap
WARNING
Tip Over Hazard
drain hose
drain
hose
15