Using The Hedge Trimmer With The Trimmer On Its Side - Gardenline 43671/HTKS26 User Manual

26cc 2-stroke petrol hedge trimmer

Hide thumbs

Table Of Contents

Table of Contents

Operating Instructions

• Do not use this equipment for purposes other than trimming shrubs, hedges,

or bushes.

• Never operate the hedge trimmer without a properly functioning muffler and

spark plug cover installed.

• Ensure that the blade cover is removed before starting the hedge trimmer.

• Never operate the hedge trimmer unless it is properly assembled and in good

working condition.

• Start the engine only when you are close to the working area.

• Always trim or cut at high engine speeds. Do not run the engine slowly at the

start or during trimming operations.

• Place yourself in a well balanced position, stable on both feet.

• Avoid cutting thick branches (larger than 24mm), as this will damage the blades

and shorten the life of the drive system.

• Always keep your body to the carburetor side of your trimmer, never on the

muffler side.

• Maintain a steady, even posture while operating. Do not over-reach.

• If the blades jam when operating, switch the engine off and clear any

obstruction.

WARNING.

• If the blades connect with a hard object during operation stop the engine and

check the blade for damage.

• Never work towards people or solid objects such as walls, trees or vehicles etc.

• Always release the throttle trigger and allow the engine to return to idle speed

when not cutting.