Page 1
BATTERY SYSTEM Product Info https://help.tools Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. Original instructions MODEL No.: CBC36A, PRODUCT No.: 702316 IM ed 5; 10/2020...
Page 2
QR codes take you where you want to go quicky and easily Whether you require product information, spare parts or accessories, details on warranties or aftersales service, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all.
Page 3
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A 10/2020 702316...
Contents Pack Contents /Parts Description of Symbols General Safety Warnings Hedge trimmer safety warnings Extended-reach hedge trimmer safety warnings Pole saw safety warnings Brush cutter safety warnings Line trimmer and edger trimmer safety warnings Safety Warnings for battery pack Safety Warnings for battery charger Parts List Assembly and preparation Mounting the P handle...
2 X 20V Li-ion 5-in-1 Cordless Garden Kit Pack Contents /Parts Congratulations on the purchase of your Gardenline® 2 x 20V Li-ion 5-in-1 Cordless Garden Kit. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
Page 6
1 X Tool Assembly Kit 1 X Spool With Line 1 X Instruction Manual 1 X Brush Cutter Blade 1 X Warranty Card & Details AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Description of Symbols The rating plate on your product may show symbols. These represent important information about the product or instructions on its use. To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Conforms to relevant standards for electrical safety and electromagnetic compatibility.
Page 8
Wear protective footwear Wear protective clothing Beware of blade thrust The distance between the machine and bystanders should be at least 15 m Beware of thrown objects Keep sufficient distance from high-voltage lines! min. max. 3 mm 5 mm Adjust the saw chain tension. Wear eye protection 60 Months Warranty The bag is not recyclable at kerbside, and should be placed in the...
General Safety Warnings Failure to WARNING: Read all safety warnings and all instructions. follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 10
f) If operating a power tool in a damp location is unavoidable, use a Use of an RCD reduces residual current device (RCD) protected supply. the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Page 11
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing Such preventive safety measures accessories, or storing power tools. reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate Power tools are dangerous in the hands of untrained users.
Exposure to fire or temperature above 130 °C may cause explosion. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
2. Keep a firm footing and balance during operating. Use the harness provided. AFTER SALES SUPPORT 3. Replace cutting blade if cracked, chipped, or damaged in any way. Be 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
AFTER SALES SUPPORT a) This line trimmer is not allowed to be used for cutting or chopping: 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 15
- hedges, shrubs and bushes, - flowers, - in terms of composting. Otherwise, there is a risk of injury. b) Never to replace the non-metallic cutting means with metallic cutting means. c) Do not overreach. Keep proper footing and balance at all times. d) Do not touch moving hazardous parts before the machine is disconnected from the mains and the moving hazardous parts have come to a complete stop.
Page 16
b) Never allow people unfamiliar with these instructions or children to use the machine. Local regulations can restrict the age of the operator. c) Never edge while people, especially children, or pets are nearby. d) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Page 17
4. Maintenance and storage a) Remove the battery pack from the appliance before carrying out maintenance or cleaning work. b) Use only the manufacturer’s recommended replacement parts and accessories. c) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.
Safety Warnings for battery pack a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
o) Do not use any battery pack which is not designed for use with the equipment. p) Keep battery pack out of the reach of children. q) Retain the original product literature for future reference. r) Remove the battery from the equipment when not in use. s) Dispose of properly.
Page 20
8. Do not short out the contacts of battery or charger. 9. Respect the polarity “+/-“ when charging. 10. Do not open the unit and keep it out of the reach of children. 11. Do not charge the batteries of other manufactures or ill-suited models. Use only ALDI Xfinity 20V Lithium Ion batteries.
Prepare the various attachments for use as follows: Preparing the line trimmer and brush cutter AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
(Fig. D4) Line trimmer assembly 1) Place the protector (10) over the spindle so that the hole on the side of the AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
5) Insert the blade nut (20) on top of the outer flange (19), onto the spindle and tighten it by turning it anti-clockwise with the wrench (13mm) (41) provided. (Fig. F3) AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
NOTE: Check the chain tension before each use and adjust if necessary. The pole saw is fully assembled when delivered, including guide bar and saw chain. Adjusting the chain tension as follows: AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
WARNING. Improper head angle can lead to serious injuries and cause damage to property. Do not use the device before adjusting the head angle. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
4) Once in position, insert the edger wheel lock nut (a) and 2 x washers (b) into the edger wheel through the edger wheel mounting rail. (Fig. J2) AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
(Fig. K2) 4) After adjustment is complete, tighten the edger wheel depth adjusting knob (24) securely by turning it clockwise. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
5) Release the ON / OFF trigger lever (6) to stop. Using the line trimmer (with spool) 1) Hold the device with the right hand on the rear handle and left hand on AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 33
Adjusting the line length on the spool head When using the line trimmer spool (9), the line wears out over time and you have to release new line from AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Use the brush cutter like a scythe (sweep it to the right and left) at ground level. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Using the pole saw WARNING. Before using the pole saw, check that the oil tank is filled. This ensures the chain is lubricated which is done AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 36
3) in any awkward position. You may lose control of the pole saw causing severe injury. WARNING. Do not extend arms above shoulders when using pole saw. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 37
(c) and sawing further into the existing cut. The optimum sawing result is achieved if the chain speed during sawing does not drop due to overload. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
1) Hold the device with the right hand on the rear handle and left hand on the P handle. 2) Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 39
If the blade guard is clogged, stop the machine, remove the battery pack, then remove debris from the blade guard. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
1) Remove the cap of the spool as as described in the chapter “To replace the spool and line complete”. (Fig. O1) AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Replace the saw chain (25) when cutters are too worn to sharpen or when the saw chain stops. Only use replacement saw chain noted in this manual. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 42
This should be done by using one hand to raise the saw chain against the weight of the machine. Do not tension the saw chain AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
The bar rails that carry the chain should be cleaned before storing the tool or if the bar or chain appears to be dirty. The rails should be cleaned every time the chain is removed. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
(Fig. S2) 4) Fit the new edger blade into the spindle, then place the inner flange (e) with the recess on top of AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
3) Remove all plant residues with a hand brush or a brush. 4) Clean all smooth surfaces with a damp cloth. 5) Clean the housing with a soft cloth or brush. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
4) Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles. 5) Secure the product to prevent it from slipping or falling over. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
2 X 20V Li-ion 5-in-1 Cordless Garden Kit Warranty Warranty Your new Gardenline® 2 x 20V Li-ion 5-in-1 Cordless Garden Kit will more than satisfy your expectations. It has been manufactured under stringent Gardenline® Quality Standards to meet superior performance criteria.
Page 48
6. Hedge trimmer blades If you have any queries regarding these accessories, please call us on our Customer Support Line: 1300 889 028. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Charge the 20V Xfinity Li-ion battery packs. start. are flat. Brush cutter Blade The Blade is not securely fitted. Ensure the blade nut is tightened. rotates at idle speed. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Page 50
Service Agent link. Alternately call us on our Customer Support line, 1300 889 028, for advice or support. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: CBC36A • 10/2020 • 702316...
Need help?
Do you have a question about the CBC36A and is the answer not in the manual?
Questions and answers