Water Resistance - Oregon Scientific SE336 User Manual

3. Secure the lid by turning the coin clockwise.
To replace the chest belt battery:
1. Use a coin to open the battery compartment lid by
turning it anticlockwise.
2. Remove the old battery and insert a new CR2032, 3V
lithium battery.
3. Secure the lid by turning the coin clockwise.
iMPORTANT
Remember to set the profiles after every
battery replacement or reset.

WATER RESiSTANCE

The SE336 / SE336M is water-resistant up to 50 meters
(164 feet)
RAIN SHOWER-
SPLA- ING
SHES (WARM/
ETC COOL
WATER
ONLY)
50M
/ 164 OK OK
FT
• Ensure the buttons and battery compartment are secured
and intact before exposing the watch to excessive water.
NOTE
Even if both the watch and the chest belt are
water resistant, as radio signals do not carry in water, signal
transmission between the watch and chest belt will still be
impossible in water.
13
LIGHT SHALLOW SNORKEL-
SWIM- DIVING / ING/ DEEP
MING/ SURFING/ WATER
SHALLOW WATER DIVING
WATER SPORTS
OK OK NO