If You Run Into Problems - Pitney Bowes FastPac DI900 Quick Start Manual

5. Press Trial Piece to "test run" one mail piece for your job.
Refer to the Operator Guide for detailed steps on each of these
procedures:
• Verify the integrity of the mail piece by visually inspecting
the "trial piece" to confirm the presence of all materials and
accuracy of the collation order.
• Make needed adjustments and run another trial piece to
ensure job accuracy.
7. When the "trial piece" is OK, press Start to begin running the job.
8. Be sure to keep the Feeder Trays full with the job-specific material
while the machine is running.

If You Run into Problems

• If an error message appears, follow the prompts on the display. If
you cannot resolve the error, contact your supervisor or refer to
the Operator Guide on CD.
• If a material stall occurs within the machine, follow the prompts
on the display to open the appropriate cover and remove the
stalled piece. If necessary, manually advance material through
and out of the machine.
NOTE: The machine has safety interlocks on its covers,
whereby the machine will not run when a cover is open. Make
sure you close all covers before resuming operation.
• Verify you have selected the correct job.
• Verify you have the correct material for your job (inserts, sheets,
envelopes).
• Verify your material conforms to the material specifications of the
machine (see the Operator Guide).
SV61369 Rev. C
Quick Start Guide
15