Quick Start Guide
Screen Navigation Keys
•
Use the UP/DOWN and LEFT/RIGHT Arrow Keys to move the
highlight on the screen in those directions.
•
Press OK whenever you want to apply a selection that you made
using the Arrow Keys.
Machine Keys
Use the 4 keys along the bottom of the Control Panel to run the
system and control its mechanical movement:
•
Start causes the selected job to start running.
•
Trial Piece allows you to do a test run on your job. One complete
mail piece will be prepared. This allows you to verify that your
job settings are correct, that the mail piece looks the way you
want it to look, and that the system is functioning properly.
NOTES:
•
Even if the job calls for a sealed mail piece, the trial piece
will be unsealed for easy inspection.
•
Double Detect is set for trial pieces, so be sure to examine
the contents of t he mail piece.
•
Clear Deck rids the system of materials currently in process in
the paper paths.
NOTE: Only press CLEAR DECK when prompted by the
system to minimize lost material and manual mail piece
generation.
•
Stop completes pieces in process.
8
SV61369 Rev. C