Settings; Volume Setting; Balance Setting - Geemarc CL7400 User Manual

SETTINGS

SETTINGS

Volume Setting

Press '+' button on the headset to increase volume and ''-' button to
decrease volume. Holding the '+' button or '-' button will increase the
volume or decrease the volume continuously. The Headset will beep
when volume reaches midway volume..
11 11
SETTINGS

Balance Setting

The balance can be controlled by pressing the balance button on the
headphones. Press and hold this for 2 seconds, the button will light up
red. At this point pushing headset '+' button will alter the audio to the left
earphone. Pushing the '-' button will alter the audio to the right
earphone. At minimum, maximum or middle point a beep will be heard.
Balance setting mode will switch off automatically after 5 seconds.
- ..:( .( : _ () > ,::.. • •
L •
Max
R
Max
12