Settings; Volume Setting; Balance Setting - Geemarc CL7500 OPTI Manual

Volume Setting

You can adjust the volumen by pressing '+' button repeatedly
or continuously to increase volume and '-' button to decrease
volume� The Headset will beep when volume reaches midway
volume�

Balance Setting

The balance can be controlled by pressing the balance button
on the headphones� Press and hold this for 2 seconds, the
button will light up red� At this point, pushing headset '-'
button will alter the audio to the left earphone� Pushing the '+'
button will alter the audio to the right earphone� At minimum,
maximum or middle point a beep will be heard� If the buttons
are not pressed, balance setting mode will switch off
automatically after 5 seconds�

SETTINGS

10