Chapter 6. Digi 002 And Digi 002 Rack Back Panels - DigiDesign Digi 002 Getting Started

chapter 6
Digi 002 and Digi 002 Rack Back Panels
The Digi 002 and Digi 002 Rack back panels
house all the audio, MIDI and computer con-
nectors for the unit. The function of each con-
nector and their associated switches are ex-
plained in this section.
See Figure 3 on page 52 and Figure 4 on page 52.
Operating Levels and Headroom
All Digi 002 and Digi 002 Rack audio inputs and
outputs are set for 14 dB of headroom below
0 dB, or full code. This means at the nominal
reference input level (+4 dBu or –10 dBV) you
can have up to 14 dB of headroom before input
or output clipping occurs.
The maximum input and output of Digi 002 or
Digi 002 Rack using balanced TRS cables on any
of the +4 dBu, 1/4-inch connectors is +18 dBu
(6.15 Vrms).
Sample Rate and Resolution
Support
The Analog-to-Digital and Digital-to-Analog
converters on all Digi 002 and Digi 002 Rack an-
alog inputs and outputs, as well as the S/PDIF
Digital I/O ports, support sample rates of 44.1,
48, 88.2, and 96 kHz. The Optical I/O ports sup-
port sample rates of 44.1 and 48 kHz in ADAT
Optical mode, and sample rates up to 96 kHz in
Optical S/PDIF mode.
All the analog and digital inputs and outputs on
Digi 002 and Digi 002 Rack support up to 24-bit
resolution audio.
Chapter 6: Digi 002 and Digi 002 Rack Back Panels 51