DigiDesign Digi 002 Getting Started page 91

Click Return To Zero to start recording from
4
the beginning of the session. You can also record
according to a selection or from the cursor loca-
tion in the Edit window.
Click Record in the Transport window to en-
5
able recording.
Click Play or press the Spacebar to record on
6
all record-enabled tracks.
Record your performance.
7
Click Stop in the Transport window or press
8
the Spacebar when you are finished recording.
To play back a recorded track:
Click the track's Record Enable button a sec-
1
ond time to take it out of Record mode.
Click Play in the Transport window or press
2
the Spacebar to start playback.
Click Stop in the Transport window or press
3
the Spacebar to stop playback.
Recording To and From Digital
Devices
Digi 002 and Digi 002 Rack provide both S/PDIF
(RCA) digital input connectors and Optical con-
nectors for transfer of digital audio.
Setting Digital Format and Clock Source
Before recording from a digital source, make
sure you have enabled the appropriate Digital
Format in the Hardware Setup dialog. For more
information, see "Recording a Digital Source"
on page 17 for Windows or "Recording a Digital
Source" on page 28 for Macintosh.
Recording To and From an ADAT
You can use Digi 002 or Digi 002 Rack to inter-
face with an ADAT, either to record tracks from
an ADAT into Pro Tools LE for editing, or to
record tracks from Pro Tools LE to an ADAT.
To record ADAT tracks into Pro Tools LE:
Open or create a session in Pro Tools LE.
1
Record enable up to eight audio tracks (de-
2
pending on how many tracks are used on the
ADAT tape).
Assign ADAT Optical Inputs 1–8 to your eight
3
tracks.
Verify that Pro Tools LE is synchronized to
4
Optical, and that the Optical Format is set to
ADAT.
Click Record in the Transport window.
5
Click Play in the Transport window to begin
6
recording, then press Play on the ADAT.
When playback from the ADAT tape is fin-
7
ished, click Stop in the Transport window, or
press the Spacebar.
To record Pro Tools LE tracks to an ADAT:
Open the session you want to record to ADAT.
1
Record enable up to eight audio tracks on the
2
ADAT.
Route the output of up to eight audio tracks in
3
Pro Tools to the Optical outputs on Digi 002 or
Digi 002 Rack.
Verify that Pro Tools LE is referencing its Inter-
4
nal Clock Source in the Hardware Setup dialog.
Chapter 8: Working with Pro Tools LE 83