Table of Contents
Advertisement
DATA ON OPERATION
The data state is enabled by one of the following (depending
on how it was disabled). "DATA ON" will be displayed on the top
line in the display for two seconds then the display returns to
normal.
•
Pressing the no data (ND) key toggles data state on or off.
•
Clearing an emergency but valid only if emergency caused
data off operation.
EXITING DATA CALLS
Under normal conditions, the radio enters the scan lockout
mode and returns to the control channel after completion of a
data call (transmit or receive). If, during a data call,one of the
following conditions occurs, the data call is immediately termi-
nated and the radio performs the desired function:
•
PTT activated.
•
Emergency declared by pressing the pre-programmed
emergency button.
•
A group or system change.
SCAN LOCKOUT MODE
Following the transmission or reception of a data call, if scan
is enabled, scanning will stop temporarily [two independent pre-
programmed times (after receive data call and after transmit
6 6 3 3
Advertisement
Table of Contents
