Table of Contents
Advertisement
data call)]. During this time the scan indicator will flash to indi -
cate that scan is enabled but temporarily suspended. This mode
is normally exited when the pre-programmed time expires; how-
ever, the following actions will terminate the scan lockout mode
before the timeout is completed.
•
The CLEAR button is pressed.
•
The PTT is pressed.
•
A group or system change.
•
Entering phone call mode.
•
Entering individual call mode.
•
A new emergency assignment has been received.
•
An emergency declared or cleared.
•
Receiving an individual or phone call.
•
Receiving Agency, Fleet or System All Call.
•
Pressing the SCN button to turn scan on or off.
DATA LOCKOUT MODE
During the voice call scan hang time (pre-programmed) the
radio will not receive data calls.
6 6 4 4
Advertisement
Table of Contents
