Table of Contents
Advertisement
FIXED P1 A priority one group has been pre-programmed
FIXD LST A fixed scanlist has been pre-programmed into
4. To add or delete additional groups, repeat steps 2 and 3.
A group can also be deleted from the scan list, if it is not the
currently selected group, by pressing
tion while the radio is displaying the unwanted group. The group
will be deleted from the system' s group scan list in the same
manner as if done using the steps above. Deletions done in this
manner will not remain deleted if the radio is turned off and then
back on.
T T u u r r n n i i n n g g S S c c a a n n O O n n
1.
Toggle scan operation on by pressing
on when the radio is scanning.
2.
When a group on the scan list receives a channel assign-
ment, the radio unmutes on the assigned channel and
comes on. Line one shows G G R R followed by the logical ID
number (if received) of the unit sending the message, or the
associated name if the ID number is found in the individual
call list. The group name displays on line two.
If the radio detects a call from the currently selected group,
-
it has priority and the radio will switch to the selected
group call.
into the radio. A new priority one group cannot
be selected.
the radio. It is not possible to change the list
without reprogramming the radio.
during scan opera-
a
.
s
will turn
3 3 9 9
Advertisement
Table of Contents
