Selection Mode Rules - Ericsson EDACS M-RK-II SCAN Operator's Manual

The radio may be programmed to wrap around from one end
of a list to the other end or to stop at the ends.
To exit the selection mode, press the CLEAR/MONITOR but-
ton or wait for the timeout.
M M E E N N U U
The menu function accesses features that are not available
directly from the keypad. The order and specific number of menu
items available is configurable through programming. Upon radio
power up, the menu item that is at the beginning of the menu list
will always be displayed first. Subsequent access to the menu
function will return the last menu item that was shown in the
display. To
, ,
m , .
during the selection process. All of the selection mode rules
previously detailed apply to the menu item selection process
with the exception of direct access. The radio will continue to
receive and transmit normally while in the menu function.
While in system, group or channel selection mode, the radio
continues to receive calls normally and continues scanning
if it is enabled. If a call is received during the selection mode
process the radio will return to the normal receive mode
display. Continuing with the selection process will return the
display to the same point in the selection process if the
selection mode time out has not yet expired. Any press of
the PTT button during the selection mode process will initi-
ate transmission and exit the selection mode.
2 2 6 6
S Y S
enter the
, and the CLEAR/MONITOR button are used
N N O O T T E E
= 3
menu mode, press
m
.