Installation - McIntosh MHT100 Owner's Manual

A/v system controller
Table of Contents

Advertisement

Installation

The MHT100 can be placed upright on a table or shelf,
standing on its four feet. It also can be custom installed in a
piece of furniture or cabinet of your choice. The four feet
may be removed from the bottom of the MHT100 when it
is custom installed as outlined below. The four feet to-
gether with the mounting screws should be retained for
possible future use if the MHT100 is removed from the
custom installation and used free standing. The required
panel cutout, ventila-
tion cutout and unit
dimensions are
shown.
Always provide
adequate ventilation
for your MHT100.
Cool operation en-
MHT100 Front Panel
sures the longest pos-
Custom Cabinet Cutout
sible operating life for
any electronic instru-
ment. Do not install
the MHT100 directly
above a heat generat-
ing component such
as a high powered am-
plifier. If all the com-
ponents are installed
in a single cabinet, a
quiet running ventila-
tion fan can be a defi-
nite asset in maintain-
ing all the system
components at the
coolest possible oper-
ating temperature.
A custom cabinet
installation should
provide the following
minimum spacing di-
mensions for cool op-
eration. Allow at least
4 inches (10.16cm)
MHT100 Bottom View
above the top, 2
in Custom Cabinet
inches (5.08cm) be-
low the bottom and
1 inch (2.54cm) on
each side of the A/V
System Controller, so
MHT100 Side View
in Custom Cabinet
that airflow is not obstructed. Allow 21 inches (53.34cm)
depth behind the front panel. Allow 1 inch (2.54cm) in
front of the mounting panel for knob clearance. Be sure to
cut out a ventilation hole in the mounting shelf according
to the dimensions in the drawing.
17-
43.34cm
15.24cm
Cabinet
Front
Panel
Opening
for Ventilation
Support
Shelf
1"
2"
2.54cm
5.08cm
12-
"
1/2
31.75cm
"
1/16
6"
Cutout Opening
for
Custom Mounting
Cutout Opening for Ventilation
2-
"
1/2
6.35cm
7"
17.78cm
Cutout
14-
"
1/2
Opening
36.83cm
for
Ventilation
14-
"
1/16
35.71cm
1-
"
1/4
3.18cm
Installation
8-
"
5/16
21.11cm
Chassis
Spacers
15"
38.1cm
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents