McIntosh MHT100 Owner's Manual page 44

Bass and Treble
The MHT100 allows for changing the tonal response for
any of the eight sources via the BASS and TREBLE TRIM
Adjustments. Any tonal changes made are saved in perma-
nent memory. The Bass and Treble Tonal Response can be
adjusted up or down by 12db from the Flat Setting.
Note: The TRIM Adjustments may be performed from either the
Front Panel or by Remote Control. The TRIM Adjustment
examples below are performed by using the Remote Control.
1. Press and release the TRIM Push-button on the Remote
Control until BASS TRIM appears on the Front Panel
Alphanumeric Display. Refer to figure 44.
2. Press and release the LEVEL Up
the +10 appears to the right of BASS TRIM on the
Front Panel Alphanumeric Display. This is an example
of increasing the Bass response by +10dB.
3. Press and release the TRIM Push-button until TREB
TRIM appears on the Front Panel Alphanumeric Dis-
play. Refer to figure 45.
4. Press and release the LEVEL Up
the +11 appears to the right of TREB on the Front
Panel Alphanumeric Display. This is an example of in-
creasing the Treble response by +11dB.
44
Figure 44
Push-button until
Figure 45
Push-button until
Display Brightness
The MHT100 Trim feature allows adjustments to the
brightness of the Front Panel Alphanumeric Display to the
desired intensity. The Display Trim brightness range ex-
tends from Off to a maximum of 10.
Note: You may find it easiest to make Display adjustments
with the Front Panel Controls.
1. Press and release the TRIM Push-button on the Remote
Control, or rotate the TRIM SELECT Control, until
DISPLAY appears on the Front Panel Alphanumeric
Display. A number to the right of the display indicates
the current brightness level. Refer to figure 46.
2. Press a LEVEL Up
Remote Control, or rotate the TRIM LEVEL Control,
until you reach the desired display brightness.
Figure 46
or Down Push-button on the