McIntosh MHT100 Owner's Manual page 47

2. Select the desired Zone B Source and adjust the Vol-
ume to the desired listening level by pressing the ap-
propriate push-buttons on the Keypad or Remote Con-
trol. Refer to figures 60, 61 and 62.
Note: If Zone A is On, Zone B Input may be changed from
the MHT100 Front Panel by first pressing the ZONE
B Push-button and then rotating the INPUT Selector
Control until the desired source is selected.
3. If a McIntosh Disc Player is connected to the
MHT100, most operating functions can be performed
with the keypad or Remote Control.
Figure 60
How to Operate the MHT100, con't
Figure 61
Figure 62
47