Using The Pause (P) For Sending Touch Tones; Using The Stereo Earphone-Microphone With Audio Remote Control (Optional) - SoftBank 910T User Manual

Using the Pause (P) for Sending Touch Tones

The pause "P" allows you to send sequences of touch tones, each separated
with a pause "P". It is convenient if you register multiple touch tones such as
remote operation numbers of your home phone.
Saving Touch Tones to the Contacts List
Example: Save the following three numbers.
Phone number
Answering machine code
Answering machine playback code : #1
1
Save 03123XXXX3P#7777P#1 as the phone number
of an entry
For details on registering a Phone Book entry, see page 4-2.
●
Sending Touch Tones
1
Open a Phone Book entry containing the touch
tones
For details on how to access a Phone Book entry, see page 4-7.
●
2
Press N
A call is made to the phone number before the fi rst "P."
3
Press @
The sequence of touch tones before the next "P" is sent.
Repeat this step until all the touch tones have been sent.
●
: 03-123X-XXX3
: #7777

Using the Stereo Earphone-microphone with Audio Remote Control (Optional)

If you use the stereo earphone-microphone with audio remote control
(optional) and the attached stereo earphone, simply pressing the switch of
the stereo earphone-microphone with audio remote control allows you to dial
a preset phone number or answer a call without even opening your handset.
1
Open the earphone microphone jack cover ( ① )
2
Insert the plug of the stereo earphone-
microphone with audio remote control into the
earphone microphone jack ( ② )
3
Connect the stereo earphone-microphone with
audio remote control to the stereo earphone ( ③ )
①
②
Note
When plugging or unplugging a video output cable to/from the
7
earphone microphone/AV OUT jack, the plug must be parallel with the
jack.
13
③
13-29