Transferring Files Via Bluetooth - SoftBank 910T User Manual

Transferring Files via Bluetooth

Sending Data
1
Access a function that supports Bluetooth
Select a file →K (Menu) → Send/Send vCard →@
2
Via Bluetooth →@
3
Select the destination device →@
If the receiving device is not registered, select J (Search) and then
●
select the receiving device.
Note
7 Files without transfer permission and files in Saved Pages cannot be
sent.
Removal of the memory card during a file transfer from the memory
7
card may result in loss or damage of files on the memory card.
Tip
Depending on the settings of a receiving device, the same authentication
7
PIN code (any 4 to 16 digits) entry window may appear after selecting
the destination device and pressing
7 A part of vObject information may be deleted or changed on some
10
destination devices.
10-8
TM
TM
→
@ . a
Receiving Data
The handset can receive files when the Bluetooth
(page 10-6) is ON.
1
In standby mode, receive a connection request
from another Bluetooth
YES →@
If the device information of the 910T is not registered in the
●
destination device, the same authentication PIN code (any 4 to 16
digits) entry screen appears. Enter the same authentication PIN code
(any 4 to 16 digits) on the 910T and Bluetooth
2
YES →@
● To reject the reception of fi les, select NO.
When the handset receives a Phone Book entry or schedule fi le,
●
select YES to register it on your Phone Book or schedule.
3
Phone Memory/Memory Card →@
To receive another fi le, repeat Steps 2 and 3.
●
Note
7 The handset cannot receive files other than standby mode.
Tip
Return the handset to standby mode before receiving a connection
7
request from another Bluetooth
7 Some vObject information may not be received.
TM
communication setting
TM
compatible device →
TM
compatible device.
TM
compatible device.