Setting User Id And Password - SoftBank 910T User Manual

Operating Precautions
If you forget your password, perform the following:
●
In standby mode→ K→
設定・申込
・Follow the onscreen instructions.
Try again if synchronization failed due to poor reception or a low battery.
●
Synchronization may have taken place with Normal Sync regardless of
the synchronization type settings.
If you synchronize the Phone Book with the synchronization type of
●
Normal Sync, From Client, or Backup after deleting all the entries on
the Phone Book on your 910T, the Phone Book on the server is deleted. If
you synchronize the Phone Book with the synchronization type of Normal
Sync, From Server, or Restore after deleting all the entries in the
Phone Book on the server, the Phone Book on your 910T is deleted.
Of the Phone Book items, Picture and Personal Info. are exempted
●
from synchronization. These items set in the handset are all deleted if you
synchronize in Restore type.
SoftBank is not liable for any loss of information in the Phone Book on the
●
910T and the server due to cancellation of the service or errors during
synchronization.
In order to maintain consistency between the Phone Book on 910T and
●
the server, we recommend that you synchronize the Phone Book regularly.
It may take time to synchronize after you carry out a lot of editing
(modification, addition, deletion, etc.) on the Phone Book on your 910T or
the server.
(My SoftBank) → 利用状況の確認

Setting User ID and Password

Set your User ID and Password to use S! Address Book. User ID and Password
are sent to you by an SMS message after subscription.
If the message haven't arrived, see the information about in case you have
●
forgotten the Password on the left.
User ID is your phone number.
●
Main
E E
Phone Book
menu
1
User ID →@→ Enter User ID →@
2
Password →@→ Enter Password →@→J (Save)
→ YES →@
E
S! Addr. Book Sync Settings
4
4-13