Table of Contents
Advertisement
Turning Handset Power On/Off
1
Turning Handset Power On
1
Press and hold O
The power is turned on and the standby screen appears.
Tip
7
After you turn on your handset, it does the following.
・ A wake-up alarm sounds (page 11-4).
・ The Charging Indicator illuminates.
・ The Camera/Video Indicator illuminates.
・ The External Light flashes.
If PIN1 Setting (page 12-1) is set to Activate, enter your PIN1 code.
7
The following windows appear the first time you turn on the power of
7
your handset or after performing Reset All or Reset Setting (page
12-5).
・ Date&Time Settings (page 1-17).
・ Retrieving Network Information (right)
(appears when you press
Turning Handset Power Off
1
Press and hold O
The power is turned off.
Tip
7
Before your handset turns off, it does the following.
・ The shutdown tone sounds (page 11-4).
・ The External Light fl ashes.
1-16
@ ,
a
J or
j
K in standby mode).
k
Retrieving Network Information
Before using Yahoo! Keitai, Mail, S! Appli, etc., retrieve the network connection
information.
The first time you press @ , J or K after purchasing your handset, a
prompt appears.
1
In standby mode →@ , J or K
2
Select YES →@
A network connection is established and the network information is
retrieved.
Note
7
If network information is not retrieved, it will limit some of the available
features of the 910T.
After you replace the USIM Card, make sure you retrieve network
7
information.
Tip
7
You can also retrieve network information from the Main menu (page
11-15).
Advertisement
Table of Contents
