Transferring Music From A Pc To A Memory Card - SoftBank 910T User Manual

Transferring Music from a PC to a Memory Card

To transfer music files from a PC to your handset, you need to use data
transfer mode to establish a connection between the PC and your handset.
Offline mode is set while your handset is in data transfer mode. When the
●
handset is in offline mode, it cannot make/receive calls, send/receive
messages, nor connect to Yahoo! Keitai. In this mode, all the keys are
locked.
Music files cannot be played on the handset unless they are transferred
●
using music transfer software.
For details on operating music files, refer to the BeatJam 2007 for 910T
●
Guide Book.
Switching to Music Transfer Mode from the Main Menu
Switch to the transferring data mode manually from the Main menu if the
handset does not automatically switch to the transferring data mode when
connected by USB, or when you want to establish a connection again after
canceling the transferring data mode.
1
Use the USB cable to connect your handset to a PC
2
In standby mode →@→ Settings →@→
Connectivity →@→ USB →@→ Data Transfer →@
Tip
Offline mode is set while your handset is in data transfer mode. If the
7
handset cannot switch to offline mode because it is communicating
with another device, a confirmation window appears.
7 A warning window appears if the memory card is not properly
formatted. Format the memory card and perform the operation again.
Tip
If the USB cable is unplugged while the transferring data window is
7
shown, a confirmation window appears and the handset is disconnected
from the device.
Switching to Data Transfer Mode while Connected with USB
1
Open your handset, display the standby window
and use the USB cable to connect your handset to
a PC → YES →@
Tip
A confirmation window appears while a standby mode application is
7
active.
7 In the following cases, your handset does not switch to data transfer
mode when you connect it to a PC via a USB cable.
・The Password Lock is activated.
・Your handset is closed.
・Memory card is not inserted.
・The display setting of the confirmation window (page 10-14) is set to
Do not Display.
10
10-13