Setting The Tv System; Using International Call Service; Changing The International Code; Adding An Entry To The Country Code List - SoftBank 910T User Manual

Note
7 Some files may not be available for the TV display.
7 The screen display cannot be switched while you are recording a video
or when the delay timer (page 6-16) is activated.
When plugging or unplugging a video output cable to/from the
7
earphone microphone/AV OUT jack, the plug must be in parallel with
13
the jack.

Setting the TV System

The TV systems supported by your handset are NTSC (Japan and U.S.A.) and
PAL (Europe). SECAM is not supported.
Main
E
Settings
menu
1
NTSC/PAL →@

Using International Call Service

When making an international call, simply add the international code and
then select a country code from a list after entering the other party's phone
number. Also change the international code and add entries to the country
code list.
Prior subscription is required for the international phone service. For
●
details, contact SoftBank General Information (page 21-30).

Changing the International Code

Main
E
Settings
menu
Intl. Calls
13-26
E E
Phone Settings AV Output
E E
Call Settings Call Services
1
Intl. Code →@→ Enter your security code (page
1-21)
The default international code appears.
2
Enter the new code →@

Adding an Entry to the Country Code List

The country code list already includes the country codes of 17 countries. You
can also edit and add entries. The list can contain up to 20 entries.
Main
E
Settings
menu
Intl. Calls
1
CountryNumber →@
2
K (Menu) → Add →@
3
Enter a country name →@
4
Enter a country code →@
The country code is added.
Tip
After selecting a country name in the country code list, press
7
to perform the following:
Edit/Delete*
* Only the entries for the three additional country codes can be deleted.
E
E E
Call Settings Call Services
K (Menu) k
E