Table of Contents
Advertisement
Advanced Operations During a Call
■ Sending Push Tones (Dial Pause)
Send push tones to remotely control a home answering machine, send
messages to pagers or use services that require push tones.
Saving Dial Pause Data
Save Dial Pause data that will be sent as push tones. 0 to 9, #, * and
"p" (pause) can be saved. Enter "p" where you want to add a pause to
separate push tones. Only one data file (up to 128 characters) can be
saved.
A Press c and select
14
Settings → Common Set. → Dial Pause Set.
B Enter dialing data
C Press M (OK)
Tip
• To enter "p"
Press # for 1+ seconds.
14-2
(Settings) → Call
Sending Push Tones
Make a call to send the saved Dial Pause data as push tones. The
numbers up to pause are automatically sent at 3 seconds interval.
A Make a call
B During the call, press M (OPTIONS) and select
Send Pause Dial
Tip
• Dialing during a call or after a phone number entry can also send push
tones.
Setting a Call Handling Operation When
the Handset is Closed (Close Setting)
Set a call handling operation performed when the handset is closed.
[Default]
■End The Call
A Press c and select
Settings → Voice Call → Close Setting
B Select an item
(Settings) → Call
Advertisement
Table of Contents
