Touch Tones; Sending Touch Tones; Sending Series Of Touch Tones; Sending Touch Tones Using Link Dial - SoftBank 304T User Manual

Touch Tones

Send touch tones to various devices or services.

Sending Touch Tones

Use Keypad to send a touch tone during a call
EThe touch tone of the pressed key is sent.
Send any of the following numbers and symbols: 0 to 9,

Sending Series of Touch Tones

Save a series of touch tones in a Phone Book entry (@ page 5-2). Send all the touch tones at
the same time to services or devices. This feature is convenient for sending messages to a
pager.
1
When a connection is established, press D and search for the
Phone Book entry
For details on searching for Phone Book entries, see page 5-17.
2
Press N
If two phone numbers are saved to the Phone Book entry, select the touch-tone sequences
before pressing N.
3
Use G to select Send Touch Tones and press @
EThe touch tones are sent.
Send up to 24 touch tones at the same time.
Touch tones can also be sent from Redial (@ page 2-4), Received Call
●
12
Note
(@ page 2-18), Notepad Memory (@ page 2-17), etc.
-, ／ and ・ in Phone Book entries are not recognized as touch tones.
●
12-14
and ＃

Sending Touch Tones Using Link Dial

Save touch-tone sequences after a phone number in a Phone Book entry. When entering
several sequences, separate each sequence by entering a pause symbol. This feature is
convenient for operating your home answering machine or other devices.
Saving Link Dial in Phone Book
ex.
Entering Following as Link Dial in Phone Book Entry
Phone number: 03-123X-XXX3
Answering machine PIN: #7777
Answering machine playback code: #1
Enter 03123XXXX3・ #7777・ #1 for the phone number of a Phone Book
entry
To enter pause symbols (・), press P three times for the first pause symbol and two times for
●
subsequent pauses.
For details on creating Phone Book entries, see page 5-3.
●
Making Calls with Link Dial
1
Press D and search for the Phone Book entry
For details on searching for Phone Book entries, see page 5-17.
2
Press N
EThe phone number is dialed. When a connection is established,
and ・ flashes.
If there are two or more phone numbers in the Phone Book entry, select the link dial and
press N.
3
Press CN
EThe next pre-entered touch tone sequence is sent. When the next sequence is sent,
appears and the next ・ flashes.
Repeat this step until all touch tone sequences have been sent.
appears
12
12-15