Using Headphones - Canon XA30 Instruction Manual

Using Headphones

Using Headphones
Use headphones for playback or to check the audio level while recording. The following procedure
explains how to adjust the volume.
Operating modes:
92
1 Open the [Headphone Volume] screen.
>
[FUNC.] [MENU]
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch [Ô] or [Õ] to adjust the volume and then touch [X].
• You can also drag your finger along the volume bar.
To adjust the volume during playback
During playback, adjust the headphones volume the same way you adjust the speaker's volume
(A 104).
IMPORTANT
• When using headphones, make sure to lower the volume to an appropriate level.
NOTES
• Use commercially available headphones with a ∅ 3.5 mm minijack.
• When you are monitoring the audio, you can choose to synchronize the audio signal with the video
signal or monitor the audio in real time. Use the q
method. Note that there will be a slight delay when you monitor in real time. Regardless of the
setting, however, the audio and video signals recorded will be synchronized.
> q >
[Headphone Volume]
>
[Monitor Delay] setting to select the
mode.