Copying Recordings To An External Video Recorder; In High Definition; In Standard Definition - Canon XA30 Instruction Manual

Copying Recordings to an External Video Recorder

Operating modes:

In High Definition

Connect the camcorder to Blu-ray Disc recorders and other AVCHD-compatible digital video
recorders using the supplied USB cable to make copies of your movies in high definition. If the external
digital video recorder has an SD memory card slot*, you can use the memory card to copy your
movies without connecting the camcorder.
* Make sure the external device is compatible with the type of memory card used.
Connecting
1 Power the camcorder using the compact power adapter.
2 Open the desired AVCHD movie index screen (A 103).
3 Connect the camcorder to the digital video recorder using the supplied USB cable.
4 Select the memory card that contains the scenes you want to copy.
• Select an option other than [All (for PC only)].
• Camcorder: When the connection is successfully established, [USB Connection] appears on the
screen.
Recording
Details will vary depending on the device used so be sure to refer to the instruction manual of the
digital video recorder.

In Standard Definition

You can copy your movies by connecting the camcorder to a VCR or a digital video recorder with
analog audio/video inputs. Video output will be in standard definition, although the original scenes may
be in high definition.
Connecting
Connect the camcorder to the VCR using the supplied STV-250N Stereo Video Cable. Refer to
A
Connection Diagram (
Recording
1 Camcorder: Power the camcorder using the compact power adapter.
2 External recorder: Load a blank cassette or disc and set the recorder to record standby
mode.
3 Camcorder: Open the desired movie index screen (A 103).
• Verify that q >
4 Camcorder: Locate the scene you wish to copy and pause the playback just before the
desired scene.
Copying Recordings to an External Video Recorder
111).
[Output Terminal] is set to [Ò AV OUT].
123