Selecting The Terminal Used For Output; Using The Hd/Sd-Sdi Terminal; Using The Hdmi Out Terminal - Canon XA30 Instruction Manual

Connecting to an External Monitor

Selecting the Terminal Used For Output

To output your recordings on an external monitor, you must first select which terminal you will use.
1 Open the [Output Terminal] screen.
>
[FUNC.]
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
112
• If you selected [
relevant procedure below to configure the output signal.
Options
( Default value)
[j Off] There is no output from any terminal.
[ HD/SD-SDI]
[ HD/SD-SDI & HDMI]
[ HDMI]
[Ò AV OUT]

Using the HD/SD-SDI Terminal

The digital signal output from the HD/SD-SDI terminal includes the video signal, audio signal and time
code signal. If necessary, perform the following procedure to change the video output signal.
1 Open the [HD/SD-SDI Output] screen.
>
[FUNC.]
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
NOTES
• By default, onscreen displays will be embedded in the output video signal. You can change this
using the q

Using the HDMI OUT Terminal

TM
The HDMI OUT terminal also offers a digital connection and outputs both a video and audio signal.
If you selected [k Automatic], the output signal will automatically switch to HD or SD depending on
the capability of the external monitor. In
linear PCM audio with a sampling frequency of 48 kHz.
1 Open the [HDMI Output] screen.
>
[FUNC.]
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
NOTES
When q
•
from the HDMI OUT terminal will be determined by the q
> q >
[MENU] [Output Terminal]
HD/SD-SDI], [
There is output only from the HD/SD-SDI terminal.
There is output from the HD/SD-SDI and HDMI OUT terminals.
There is output only from the HDMI OUT terminal.
There is output only from the AV OUT terminal.
> q >
[MENU] [HD/SD-SDI Output]
>
[Output Onscreen Displays] setting.
> q >
[MENU] [HDMI Output]
>
[Output Terminal] is set to [
HD/SD-SDI & HDMI] or [
mode, the HDMI OUT terminal outputs two-channel
HD/SD-SDI & HDMI], the signal output
>
[HD/SD-SDI Output] setting.
mode.
HDMI], continue with the
mode.
mode.