Type Description - Rotax 912 UL Operator's Manual

7.1)

Type description

e.g. ROTAX 912 A 2
◆ NOTE:
ROTAX
Type:
Certification: A ............ certified to JAR 22 (TW 8/89)
Configuration: 1 ............. Prop shaft with flange for fixed pitch prop, P.C.D.
Effectivity: 912 Serie
OM Edition 1 / Rev. 0
The type designation is of the following composition.
912 ......... 4-cyl. horizontalle opposed, normal aspirated
engine
F, S ........ certified to FAR 33 (TW9 - ACG)
UL, ULS . non-certified aircraft engines
100 mm.
◆ NOTE:
This configuration is not available any longer
and will be replaced by configuration 2.
2 ............. Prop shaft with flange for fixed pitch prop, P.C.D.
75 mm, P.C.D. 80 mm and 4" P.C.D.
3 ............. Prop shaft with flange for constant speed
propeller P.C.D. 75 mm, P.C.D. 80 mm, P.C.D.
4" and drive for hydraulic governor for constant
speed propeller.
4 ............. Prop flange for fixed pitch propeller P.C.D.
75 mm, P.C.D. 80 mm, P.C.D. 4" and prepared
for retrofit of a hydraulic governor for constant
speed propeller.
BRP-Rotax
02091
page 7 - 2
Jan. 01/2007